Flex Full Slave SW FLS0.5S
FLEX currently supports more than 9,000 vehicles and users can rely on the release of new SW protocols by MMS for this tool every two weeks to make sure they are always up-to-date in their field. The Full package of software functions for FLEX in Slave version includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx & Infineon TC17xx
Datalogger Plus: the best ally for each professional tuner
Configure your Datalogger
Check the compatibility on the vehicle list so select the needed vehicle. Connect the OBDII cable (FLX2.10) and go through the steps of the checklist to carry out a perfect test.
Choose the most suitable sensors and values for your analysis, configure their display and jump on the car to make your record.
Choose the most suitable parameters
The right amount of parameters that could be analyzed depends on the selected model of vehicle, ranging between 50 and 2000 switchable sensors.
To minimize configuration times of the most suitable sensors, the software automatically groups the most commonly used parameters in default mode. This significantly saves the user's time and guarantees an intuitive and fast search.
Each sensor can be displayed in 5 different modes: graph, numerical value, linear gauge, large gauge and small gauge.
Data sampling up to 50Hz in Plus mode
The Plus version allows you to record with sampling up to 50Hz.
It is possible to share and view your data from any device, when connected to the ECUs, witch adapts automatically on the base of the number of sensors selected by the user.
This is to offer maximum efficiency in all conditions and with a sampling rate of up to 20ms.
Share and view data directly from the online panel
Use the online chart to view and analyze the recording once the test is finished.
Share measurements with other users at any time. By clicking on the share button the share link will be generated. The online chart is compatible with any kind of desktop and portable device.
Cabling kit: FLX3.5 color coded wiring harness
Adapter kit: 6 pcs set of pin adapters to FLX35
FLEX Base Module
FlexBox Module for FLEX
Connection cable OBD: FLEX to CAN/Kline RED
Connection cable OBD: FLEX to ENet GREEN
Connection cable: FlexBox port C to NEC 7F00 XX
Connection cable: FlexBox port D to BDM MPC5xx
Connection cable: USB 2.0 AM-BM BLK 1.8m
FlexBox port E 40 pin adapter for FLK35
FLEX & FlexBox diagnostic adapter
Switch Mode Power Supply for FLEX with plugs
SW FLEX RENESAS SH7XXXX MASTER
The FLS0.6M software package contains all the protocols for work in OBD, Boot and Bench on ECUs and TCUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD, Boot and Bench as well. Thanks to the functions of FLEX, it is also possible to perform a complete read and write directly via OBD on this family of microprocessors. MAGICMOTORSPORT recommends that this SW package be used with FLEX and the KUBOTA OBD socket to FLEX connection cable to obtain more efficient results and safer working conditions with no connection errors.